Handles & Pulls

Manufacturer: Posi Lock Puller, Inc Brand: Posi Lock Puller Model: PM5

This Posi Lock PM5 manual puller set consists of a three-jaw puller with a 2-ton capacity (model 103), a three-jaw puller with a 5-ton capacity (model 104), a three-jaw puller with a 10-ton capacity (model 106), a two-jaw puller with a 6-ton capacity (model 206), and a three-jaw puller with a 20-ton capacity (model 110). It is suitable for extracting shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys. The jaws of the model 103 puller are made of investment-cast steel for durability, and the jaws of the other four pullers are made of forged steel for increased strength over investment casting. The set comes with a tool board for convenient storage, and four tip protectors that protect the center bolt tip and provide additional leverage for pulling operations. This manual puller set is suitable for extracting shaft-fitted parts in a range of industries, including automotive, HVAC, wind power, and others.SpecificationsModel 103 puller3-jawModel 103 pulling capacity2 tonsModel 103 center bolt diameter0.37" (9.4 mm)Model 103 reach3" (76.2 mm)Model 103 spread range0.25 to 4.5 inches (6.4 to 114.3 mm)Model 103 overall length7" (177.8 mm)Model 103 weight1.3 lb. (0.59 kg)Model 104 puller3-jawModel 104 pulling capacity5 tonsModel 104 center bolt diameter0.5" (12.7 mm)Model 104 reach4" (102 mm)Model 104 spread range0.5 to 5 inches (12.7 to 127 mm)Model 104 overall length10.05" (255.3 mm)Model 104 weight4.1 lb. (1.9 kg)Model 106 puller3-jawModel 106 pulling capacity10 tonsModel 106 center bolt diameter0.62" (15.8 mm)Model 106 reach6" (152 mm)Model 106 spread range0.5 to 7 inches (12.7 to 178 mm)Model 106 overall length13.32" (338.3 mm)Model 106 weight8 lb. (3.6 kg)Model 206 puller2-jawModel 206 pulling capacity6 tonsModel 206 center bolt diameter0.62" (15.8 mm)Model 206 reach6" (152 mm)Model 206 spread range0.5 to 7 inches (12.7 to 178 mm)Model 206 overall length13.32" (338.3 mm)Model 206 weight7 lb. (3.2 kg)Model 110 puller3-jawModel 110 pulling capacity20 tonsModel 110 center bolt diameter0.75" (1...

Manufacturer: Posi Lock Puller, Inc Brand: Posi Lock Puller Model: PM4

This Posi Lock PM4 manual puller set consists of a three-jaw puller with a 5-ton capacity (model 104), a three-jaw puller with a 10-ton capacity (model 106), a two-jaw puller with a 6-ton capacity (model 206), and a three-jaw puller with a 20-ton capacity (model 110). It is suitable for extracting shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys. The jaws of each puller are made of forged steel for increased strength over investment casting. The set comes with a tool board for convenient storage, and four tip protectors that protect the center bolt tip and provide additional leverage for pulling operations. This manual puller set is suitable for extracting shaft-fitted parts in a range of industries, including automotive, HVAC, wind power, and others.SpecificationsModel 104 puller3-jawModel 104 pulling capacity5 tonsModel 104 center bolt diameter0.5" (12.7 mm)Model 104 reach4" (102 mm)Model 104 spread range0.5 to 5 inches (12.7 to 127 mm)Model 104 overall length10.05" (255.3 mm)Model 104 weight4.1 lb. (1.9 kg)Model 106 puller3-jawModel 106 pulling capacity10 tonsModel 106 center bolt diameter0.62" (15.8 mm)Model 106 reach6" (152 mm)Model 106 spread range0.5 to 7 inches (12.7 to 178 mm)Model 106 overall length13.32" (338.3 mm)Model 106 weight8 lb. (3.6 kg)Model 206 puller2-jawModel 206 pulling capacity6 tonsModel 206 center bolt diameter0.62" (15.8 mm)Model 206 reach6" (152 mm)Model 206 spread range0.5 to 7 inches (12.7 to 178 mm)Model 206 overall length13.32" (338.3 mm)Model 206 weight7 lb. (3.2 kg)Model 110 puller3-jawModel 110 pulling capacity20 tonsModel 110 center bolt diameter0.75" (19 mm)Model 110 reach9.67" (246 mm)Model 110 spread range1 to 15 inches (25 to 381 mm)Model 110 overall length20.41" (518.4 mm)Model 110 weight16 lb. (7.3 kg)Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts—the center bolt, grippin...

Manufacturer: Posi Lock Puller, Inc Brand: Posi Lock Puller Model: TB-1045

This Posi Lock TB-1045 manual puller set consists of a three-jaw external puller with a 5-ton capacity (model 104), and a three-jaw internal puller that comes with a 2.5 lb. slide hammer and a 24" slide rod (model 105). It is suitable for extracting shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys. The jaws of each puller are made of forged steel for increased strength over investment casting. The set comes with a padded carrying case measuring 16.5 x 24 x 4.5 inches/419 x 610 x 114 mm (W x L x H) for convenient storage, a tip protector, and a set of internal long jaws (in addition to the stock internal jaws) that extend the reach of the 105 puller to 6.75" with a spread range from 1 to 5.25". (W is width, the horizontal distance from front to back; L is length, the horizontal distance from left to right; H is height, the vertical distance from bottom to top.) This manual puller set is suitable for extracting shaft-fitted parts in a range of industries, including automotive, HVAC, wind power, and others.SpecificationsModel 104 puller3-jaw, externalModel 104 pulling capacity5 tonsModel 104 center bolt diameter0.5" (12.7 mm)Model 104 reach4" (102 mm)Model 104 spread range0.5 to 5 inches 12.7 to 127 mm)Model 104 overall length10.05" (255.3 mm)Model 104 weight4.1 lb. (1.9 kg)Model 105 puller3-jaw, internalModel 105 reach3"Model 105 spread range9/16 to 4 inchesGear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts—the center bolt, gripping jaws, and T-handle—and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, addin...

Manufacturer: Posi Lock Puller, Inc Brand: Posi Lock Puller Model: HP-2

This Posi Lock HP-2 hub puller adapter set has 5 tons of pulling capacity and includes a puller and two collar adapters for removing many industrial fans, automotive fans, and blower wheels from housings or shafts, reducing the force required to dismount the part. The items in this set are constructed of steel to help prevent rust and corrosion. The hub collar design allows technicians to quickly remove fans, blower wheels, and bearings by providing a solid connection between the puller and fan hub. The hub puller set includes a 104 puller, an HP-30 small collar adapter, an HP-40 large collar adapter, HP-70 tip reducer/extender for managing the length of the center bolt, and a molded plastic carrying case that is. This Posi Lock hub puller adapter set is suitable for extracting fans and blower wheels from chillers, freezers, condensers, ice machines, furnace fans, convection ovens, exhaust and ventilation fans, defrost and air conditioning fans in applications in the automotive, agricultural, and manufacturing industries. SpecificationsPulling capacity5 tonsReach4”Spread range0.5 to 5”Carrying case13 x 9.5 x 5.5 inches/330 x 241 x 140mm (H x W x D)(H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.)Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts—the center bolt, gripping jaws, and T-handle—and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical l...

Manufacturer: Posi Lock Puller, Inc Brand: Posi Lock Puller Model: TJ-1

This Posi Lock TJ-1 manual transmission bearing puller has two jaws for working in compact spaces and is suitable for extracting shaft-fitted transmission bearings. Its jaws are made of forged steel for increased strength over investment casting, and are tapered for better access in tight spaces. They can fit into a bearing's snap ring groove as narrow as 0.07". This puller has a 9.25" (235 mm) reach and a spread range of 2.75 to 14.75 inches (70 to 375 mm) for increased pulling leverage, and it comes with a tip protector to prevent the tip of the center bolt from mushrooming and provide increased leverage for pulling operations. This manual transmission bearing puller is suitable for extracting shaft-fitted bearings in the automotive industry.SpecificationsPuller2-jawReach9.25" (235 mm)Spread range2.75 to 14.75 inches (70 to 375 mm)Weight12 lb. (5.4 kg)Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts—the center bolt, gripping jaws, and T-handle—and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND.What's in the Box?TJ-1 pullerP10 tip protector

Manufacturer: Posi Lock Puller, Inc Brand: Posi Lock Puller Model: TJ-2

This Posi Lock TJ-2 manual transmission bearing puller has three jaws for equal load distribution, secure hold, and concentric pulling action, and is suitable for extracting shaft-fitted transmission bearings. Its jaws are made of forged steel for increased strength over investment casting, and are tapered for better access in tight spaces. They can fit into a bearing's snap ring groove as narrow as 0.07". This puller has a 5.25" (133 mm) reach and a spread range of 1 to 6.75 inches (25 to 171 mm) for increased pulling leverage, and it comes with a tip protector to prevent the tip of the center bolt from mushrooming and provide increased leverage for pulling operations. This manual transmission bearing puller is suitable for extracting shaft-fitted bearings in the automotive industry.SpecificationsPuller3-jawReach5.25" (133 mm)Spread range1 to 6.75 inches (25 to 171 mm)Weight8 lb. (3.6 kg)Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts—the center bolt, gripping jaws, and T-handle—and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND.What's in the Box?TJ-2 pull...

Manufacturer: Posi Lock Puller, Inc Brand: Posi Lock Puller Model: 208

This Posi Lock 208 manual puller has a 12-ton pulling capacity, has two jaws for working in compact spaces, and is suitable for extracting shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys. Its jaws are made of forged steel for increased strength over investment casting, and are tapered for better access in tight spaces. The center bolt has a 0.75" (19 mm) diameter. The diameter of the center bolt must be at least half the diameter of the shaft along which the object is pulled. This puller has an 8" (203 mm) reach and a spread range of 0.75 to 12 inches (19 to 305 mm) for increased pulling leverage. This manual puller is suitable for extracting shaft-fitted parts in a range of industries, including automotive, HVAC, wind power, and others.SpecificationsPuller2-jawPulling capacity12 tonsCenter bolt diameter0.75" (19 mm)Reach8" (203 mm)Spread range0.75 to 12 inches (19 to 305 mm)Maximum torque150 ft-lb. (203 N-m)Hex socket size1" (25.4 mm)Overall length16.25" (412.8 mm)Jaw width0.88" (22.2 mm)Weight12 lb. (5.4 kg)Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts—the center bolt, gripping jaws, and T-handle—and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.Posi ...

Manufacturer: RaceFace Brand: RaceFace Color: Black

The Race Face Evolve crank provides an attractive price point for replacement all mountain cranksets. 68/73mm BB included; compatible with BB92 press-fit or PF30 with an additional conversion kit. Net shape-forged AL-6066 arms with forged and CNC machined chromoly BB spindle. Race Face Narrow Wide ring made of 7075-T6 aluminum. Color: Black. Spindle Interface Type: RaceFace EXI. Pedal Spindle: 9/16". Chainring BCD: 104. Chainring BCD: 64. Rings: 32. BB Included: English Thread. Crank Intended Use: Mountain. Defined Color: Black. Spindle Diameter: 24. Chainrings Included: Yes. Crank Length (mm): 175. Drivetrain Speeds: 10. Drivetrain Speeds: 9. Number of Chainrings: Single.

Manufacturer: Martin Sprocket Brand: Martin Model: CH10BC

Broached crank handle with counterbore in free end of hub. Black powder coat finish. 7" Center hub to center handle length. Hub measures 1-3/8" diameter by 2-1/16" length. 8-1/4" Overall length. 3/4" Stock square bore. 3-3/8" Height handle above arm.

Manufacturer: Posi Lock Puller, Inc Brand: Posi Lock Puller Model: 204

This Posi Lock 204 manual puller has a 2-ton pulling capacity, has two jaws for working in compact spaces, and is suitable for extracting shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys. Its jaws are made with forged steel for increased strength over investment casting and are tapered for better access in tight spaces. The center bolt has a 0.5" (12.7 mm) diameter. The diameter of the center bolt must be at least half the diameter of the shaft along which the object is pulled. This puller has a 4" (102 mm) reach and a spread range of 0.5 to 5 inches (13 to 127 mm) for increased pulling leverage. This manual puller is suitable for extracting shaft-fitted parts in a range of industries, including automotive, HVAC, wind power, and others.SpecificationsPuller2-jawPulling capacity2 tonsCenter bolt diameter0.5" (12.7 mm)Reach4" (102 mm)Spread range0.5 to 5 inches (13 to 127 mm)Maximum torque20 ft-lb. (27 N-m)Hex socket size0.75" (19 mm)Overall length10.05" (255.3 mm)Jaw width0.62" (15.8 mm)Weight3.2 lb. (1.5 kg)Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts—the center bolt, gripping jaws, and T-handle—and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.Posi Lock ...