Posi Lock TB-1045 Puller Set, Internal/External Pullers

This Posi Lock TB-1045 manual puller set consists of a three-jaw external puller with a 5-ton capacity (model 104), and a three-jaw internal puller that comes with a 2.5 lb. slide hammer and a 24" slide rod (model 105). It is suitable for extracting shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys. The jaws of each puller are made of forged steel for increased strength over investment casting. The set comes with a padded carrying case measuring 16.5 x 24 x 4.5 inches/419 x 610 x 114 mm (W x L x H) for convenient storage, a tip protector, and a set of internal long jaws (in addition to the stock internal jaws) that extend the reach of the 105 puller to 6.75" with a spread range from 1 to 5.25". (W is width, the horizontal distance from front to back; L is length, the horizontal distance from left to right; H is height, the vertical distance from bottom to top.) This manual puller set is suitable for extracting shaft-fitted parts in a range of industries, including automotive, HVAC, wind power, and others.

Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts—the center bolt, gripping jaws, and T-handle—and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.

Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND.

What's in the Box?

• 104 puller
• 105 puller
• P4 tip protector
• 10561 slide rod
• 10562 2.5 lb. slide hammer
• L5 internal long jaw set
• Carrying case